Many are familiar with the term nail gun and also with its usage and befits. But, the proper usage of a nail gun can also turn out to be a bit tricky.
This “How to use nail gun for trim-step by step guide” is a quick and easy guide to show you the right way to use nail gun efficiently with the minimum amount of time. The whole process depends on being patient and following the steps accurately. Carelessness often creates some problems which can easily be avoided by taking some certain measures.
If you get to know those safety measures, then the nail gun usage would not remain that much difficult. The content is divided into some quick steps keeping that fact in mind. These few steps can help you to understand the flow and sequence of the steps.
The steps are described below which are to be followed sequentially.
The steps of How to Use Nail Gun for Trim
Adjusting the angle
Among all the steps to unlock the correct technique to use a gun nail, the angle adjusting is considered to be the most important one.
For adjusting the nail, you have to place the tip of the nail at just the location you desire to drive the nail. Generally, the nails are cylindrical shaped that is why the tip of the nail should always be lined up vertically ninety degrees to the board’s face.
Slight mistakes considering the adjustable angle can turn out to be the reason for many problems. For example, nails can harm the board by making a crack or they can even come out anytime harming the durability of the board.
Avoiding nail pops
One of the most common mistakes while using the nail gun is not being able to strike the nail correctly for which the nail coming out in an unwanted manner.
This popping of the nail can also be called nail blowout. It is a very common term in this field and anyone can make this kind of mistake anytime.
The main reason for nail blowouts is the incorrect angle of the nail gun. The whole process of setting the angle is very basic yet crucial. To avoid this kind of situation you should first assure that you holding the gun in the correct angle.
Sometimes we use the gun to strike areas in which only one side of it is visible. Such cases have their own unique way to deal with it. The gun should be slightly tilted and placed in such a manner that the nail gun is inclined to the exposed side.
Thus even if the nail pops up, it would not be any longer visible to others as the other side is being kept at the opposite.
You may find it a bit tricky at the beginning but soon you’ll get the hang of it and avoid this kind of situations. You just have to spend some time to practice the technique.
Being precise while nailing
The placement of the nail should be precise while using the gun. What you are thinking might not always be correct. A lot of things depends on the placement of the nail gun and if anything alters, many unexpected problems might pop up.
One of the most common problems is hitting a knot in the wooden piece or the nail following the grain. As a result, the nail could pop up anywhere. This problem can arise anywhere anytime.
There are many ways to deal with this kind of problem as well. If anything like this happens, there is no reason for you to panic. Keep your mind calm and think of a way to make it up with simple tricks. Like, you can cut the nail by simply using a nipper and the remainder can also be recessed by the nail.
That is why being precise while nailing is a very important step. The step is not very difficult. All you need is to keep yourself relaxed and think of the best possible solution for the time being.
Correcting the placement
The placement of the nail gun is a very crucial thing. Not only the beginners but also the professionals also get confused and carried away.
Likewise,you can make the same mistake and put the gun nails in the wrong position. But with proper practice, anyone can master the technique of the correct placement.
Some easy measures can be taken to minimize these things. Just stay alert and follow these steps. For example, placing the nail gun at just the edge or corner can create this kind of trouble.
Thus moving the location can be a good way to minimize the fact and it can also repair the loss by correcting the placement.
Avoiding split edges
Split edges are very common problems in terms of using nail guns. This kind of problem occurs when the driving nail is placed in such a manner that it is just at the edge of the board.
For this reason, the edge sometimes gets chapped and split edges are observed. You would not even notice exactly when and what did go wrong. To avoid this kind of situation, the main reason behind it must be counter-attacked which is placing the nail at the edge.
Thus, you should be aware of the placing of the gun nail and always try to keep the nails quite some inches apart from the edge. There is no such of an exact value but practice and experience will help you a lot to get a good idea about it.
Judging the nail’s size
Whether it’s about doors or any other simple board, judging the nail’s size is always an important factor. Different scenario demands different nails.
All of them are different in size and shape. If the size of the nail does not match the requirement, then there might arise a whole bunch of problems. Thus,you should always have a clear concept of the nail size and variety.
The heavy jobs require a different type of nail while the small matters use a different kind. Which is why you should get your concept cleared about the classifications of the gun nail and their features.
You can always just check the size of the nail twice before making any type of decision.
Adjusting nails that do not set
Even professional gun nail users can make silly mistakes. It is not always necessary that the problems are just done by the beginners. So you don’t have to think so much about it.
Nails can pop up anytime anywhere. If this type of situation arises, adjusting the nail would be the easiest way to minimize the loss. Usually, the nails that do not fit in are kept exposed. Such cases need attention and adjustment as well. Otherwise, any type of unpleasant incident or even an accident can occur.
Don’t worry if anything goes wrong. You can always make it up by adjusting the nose piece as it is pretty much adjustable. It also controls the nail and determines the depth of the nail. The process also adjusts the pressure which minimizes all the blunders. Thus if a nail does not quite fit in, then you should adjust it in a correct manner.
Removing nails that do not fit in
Many steps can be taken to adjust the nail which is not been set but there’s always a limit to that. There are some conditions which are advised to be checked before making any adjustments.
Some nails which are about .25 inches or more than that are not able to fit in. if you forcefully use them, they might bend badly and even hamper the trim.
In such cases removing the nails are the easiest way to deal with this situation. You can use cutters and shanks for this purpose.
Disconnection and taking the safety measures
How to use nail gun for trim-step by step guide explained the whole procedure of using the nail gun. But, you might ask what to do after that?
There are times when the nail gun is not being used. In these situations, you can also just disconnect the air hose. It would not make any problem.
The same goes for the time for cleaning a jam as well. The other safety measures have to be followed very strictly as well.
Again, keeping the gun away from children or keeping the fingers safe, wearing safety glasses are some other basic safety measures.
How to use nail gun for trim-step by step guide tried to provide the maximum amount of information regarding the procedure in order to enhance your concept and make it a whole lot easier for you to implement it.
You will eventually face some problems while using the nail gun. These problems can easily be avoided if these steps are followed correctly. Follow these and unlock the best experience of working with a nail gun.