How to Protect Vinyl Wrap – Step By Step Guide

Vinyl wrap basically is a wrap for your car and it works as a cover to the original color of the car giving the car a very new and glossy color. The vinyl varies regarding its finish as sometimes you may find it gloss finish, sometimes with a matte and sometimes maybe with a clear protective layered finish.

Marketing strategy has given the vinyl wrap different names that are also been known to use. It is also known by names like car wrap, paint wrap, color change wrap. If you are already then I may think already know the basic stuff about the vinyl wrap and here for the title.

So the main idea of the article is it takes a lot to maintain a vinyl wrap. And your main objective is to know how you can protect your vehicle. The article will give you the secrets of maintaining your vinyl wrap.

The Seven Basic Secrets of how to Protect the Vinyl Wrap

Seven Basic Secrets of how to Protect the Vinyl Wrap

Step 1:

Vinyl wrapper tends to get hot after or while driving. This is because the engine makes the surface a bit hot. And this is the time you should not at all spray or adding on the wrap of the car.

Another thing is the wrap can get hot even if you put your car exposed to the sun for a very long time. As a result, if your wrap is hot then take some time for cooling it. After it cools down then you can spray or apply other components on it.

Step 2:

This point is one of the main reasons for the premature lifting of the vinyl from the car. If you end up crossing over the edges of the vinyl wrap with polish or wax then the vinyl wrap will face problems like premature lifting. This is the reason you need to avoid crossing over vinyl wrap edges with polish or wax stuff.

Step 3:

Masking the edges of the vinyl is very important. This is important when you work on your adjacent paint surfaces. This is one of the basic strategies of protecting the vinyl wrap while working on the paint surfaces.

Step 4:

To a certain extent, vinyl wrap is very reactive to some compounds. This is the reason certain components like heavy abrasives, cutting polishes should be avoided. Because these heavy compounds tend to react with the vinyl and this may end up changing the color of the wrap. Sometimes it is also seen to discolor the item.

Step 5:

Like abrasives, the solvents also tend to react with the vinyl wrap. But the fact is solvents are very important in cleaning but using solvent comes with certain cons like discoloring or cracking. This is the reason you should make sure that you need not use solvents on it. Using solvents should be your last option.

Step 6:

Petroleum distills are very much harmful just like the abrasives and the solvents around. This is why the products that have any presence of the compound should be definitely avoided.

Step 7:

This is a truth the car owners love to do experiments over the surface but not always they get the expected result. This is the reason you should be careful at the first hand.

So if the devil finds you and you make your mind to doing so before using any new product double check the compounds and with that first use it to a smaller place and this will help in the case things get out of hand.

Daily Protective Process to Protect Vinyl Wrap

The seven secrets of protecting the vinyl wrap are necessary and work over every type but with that there some other step that varies with the type of vinyl. They are given below :

Daily Protective Process to Protect Vinyl Wrap

Regular Washing :

For gloss vinyl, the washing technique will be a bit different than the matte or flat vinyl. While for gloss vinyl mild cleaners should be used but for matte or flat you should use gloss enhancer free products.

Treatment and Maintenance :

For treating and maintaining both gloss and matte or flat vinyl has its own way of treatment. Where you should be treating the gloss vinyl as more of a painted surface there your matte or flat vinyl needs to be treated as a rubber or plastic surface.

Waxing and Sealant :

Gloss vinyl has tended to have resistance against wax or sealant type products but still, you should be very careful because certain components like solvents or distilled petroleum end up ruining the color of the wrap but for matte or flat there is no option called waxing or sealant.

This is because the treatment of these types of vinyl should be different and these surfaces do not get well compounds like these. As a result of matte and flat waxing or sealant should be avoided.

Claying :

Here again both of the types of vinyl mentioned before works differently. Yet it is recommended that you should not go for claying in any of them but if there is no way left then in gloss vinyl you can have a choice of using clay.

If the situation is like some other hampering components have already fallen over the surface and you have no other way of cleaning or removing it then a certain grade of fine clay is fine but still for any kind of claying over vinyl is not a very good option.

But when it comes to the flat or matte type of vinyl then you should definitely avoid the claying part. This is because when clay comes in touch with the surface of this type of vinyl it creates friction that is very much problematic and this is why claying on matte or flat vinyl should be avoided.

Conclusion: it should be stated that many car owners fancy giving his car a vinyl wrap. But maintaining the vinyl wrap and protecting from the environmental and chemical components is a tough one. This is why for the curious car owners seven secrets of protecting the vinyl wrap are given in the article.

We will be happy to hear your thoughts

Leave a reply

Automotive News, Guide & Advice | AutosGuide