Clicky

How To Organize Wrenches in Toolbox (15 Ways You Can Follow)

In order to get the best performance, it is very essential for you to organize wrenches in the toolbox properly. If they are not properly organized, they may get lost and this will lead to unnecessary expenses for you. They can also be easily stolen and this will not give you the opportunity to put them to optimum use.

In most instances, it is better to customize your tool case so that it will be easier for you to organize wrenches in the toolbox for optimum use. It is also essential to organize sockets in the toolbox perfectly because you can only get the best by doing so. The first step to take is to get a foam tool kit and customize the foam in such a way that your needs will be met.

For the purpose of helping you to get an ideal tool management solution, these 15 tips have been put together just for you. They include the best ways to exploit your foam, how to cut the foam properly, how to use the foam in innovative ways, and so on. Keep reading!

Steps To Organize Wrenches

Organize Wrenches

15 Easy Steps To Organize Wrenches in Toolbox

1. Create a Layout Before Cutting Foam

Not minding the kind of foam liner you are using, it is very important to cut the foam to fit your tool chest drawers and tools. If you want to exploit your foam adequately and get the best layout, you should have a plan before you start cutting.

You should place all the tools you want to place in the drawer on the foam and think about the best arrangement that will work for you. You can decide to place the tools you use frequently very close to the front so that it will be easier for you to get access to them.

As soon as you get the layout fixed, you should then trace the tools with the aid of a marker, pencil or pen. Thereafter, you should start cutting. The essence of planning before cutting cannot be overemphasized because it will lead to proper management of space.

2. Use the Right Tools for Cutting Foam

The majority of foam tool organizers as well as tool foam sheets are produced from closed-cell, cross-link foam that is repellant to chemicals and water. They are produced from materials that are durable, hence, you need the right tools to cut them so that the job will be made easier.

You can use a unity blade to get the cutting done so that it will be easier for you to incise small shapes in such a way that you will not have too many problems. A hot knife for heavy-duty foam can also be used for the cutting and you will get an ideal result.

3. Cut Finger Holes for Easy Pick Up

It may be difficult for you to pick up your tools if they are not properly placed in the toolbox foam. You should create a semi-circle hole on each side of the handle of a tool so that you will be able to grab it easily. This hole can be created with a knife and you can use a hole punch for this purpose.

4. Cut a Horizontal Strip for Easy Pick Up

This method is particularly effective for wrenches because they might be placed too close for a hole punch. You only need to cut a strip through the tools and this will make it easier for you to pick any of them. A straight edge should be used for tracing the line and the foam should be cut in such a way that the tools are neatly bisected.

5. Save Space by Putting Small Tools Close Together

It is an ideal thing for you to put all small tools close to one another so that you will be able to maximize space. They can be placed next to one another in a line that faces one direction and you can place them together with similar to puzzle pieces. You can try different layouts before going for the best one.

6. Alternate Handle Directions to Save Even More Space

You can also maximize space by alternating the direction of your tools. This is very effective for tools like screwdrivers, pliers as well as tools with a tapered end. Maximizing space will go a long way in ensuring easy management of the tools.

7. Don’t Forget Spaces for Cords and Batteries

If you are planning a form layout for power tools, it is very important for you to create spaces for batteries and cords. This will guard against losing these items and the cords will be specially prevented from damage. The hole created for cords does not need perfect shaping. It only needs to be large enough to contain the cords.

8. Use Thick Foam for Larger Tools

In order to properly arranged large tools like drills, you should go for thicker foam. The deeper drawers of your box should also be equipped with thick foam so that you will be able to avoid tools sitting too low in your drawer.

9. Cut Thick Foam with a Retractable Blade

The use of a retractable blade for the cutting of thick foam will go a long way in helping you to get the precise depth you want. It will also prevent cutting through the thick foam so that your tool will not be hitting the floor of the box.

10. Cut Out Shapes in Sections

Some tools require cutting the foam in sections instead of cutting out the whole shape at once. This is very effective for large and intricate shapes. The cutting should be carried out little by little so that you don’t cause too much damage to the foam.

11. Purchase Large Foam Sheets to Save Money

You can buy foam drawer liners or foam tool kits that will fit your toolbox drawer. However, if you are planning to organize many drawers, you can purchase a big foam kit or sheet and cut it appropriately so that they can fit many drawers. You can measure the precise sizes of the drawers with a tape measure so that you will be able to the right size and avoid waste.

12. Use Foam Scraps as Tool Box Drawer Dividers

There may be little objects that do not require cutouts because they can be kept in a group. You may require a little space for keeping nails and screws, you can use foam scraps to get this space created. You only need to cut the foam in strips and get them turned vertically in order to function as dividers. Foam scraps can also be used to pad the edges of your drawers.

13. Make an Upright Wrench Organizer

You can also save space in your toolbox if you opt for a straight-up tool organizer. This can be achieved by measuring the height of your tools when they are upright, and drawer. It is also important for you to ensure that your tools will conform to the drawer at this position so that your effort is not wasted.

You should then measure and cut the foam strips in accordance with the depth of your drawer. For instance, if your drawer is 4 inches deep and 20 inches wide, you can foam strips that are 4” x to 20”. You should then make slits in the foam and place your tools accordingly.

14. Color Coordinate for Tool Identification

If you are having more than one type of tool in your drawer, you can use different colors to make identification easier. For example, you can use black foam for screwdrivers and blue foam for pliers. In a situation whereby your tool kit comes with two layers, you can use different colors for the two layers.

15. Add Labels to Tool Box Foam

Labeling is very vital to the proper organization of your toolbox. You can add a small label to the cutout of every tool so that it will be easier to get them identified. You can also place labels on the tool boxes’ chests, storage cabinets, and drawers. This will save you time when you are looking for a tool.

Bottom Line

If your space is better organized, you will be more productive and realize your goals with ease. A toolbox foam will go a long way in helping you to get things organized for higher efficiency. You only need to design it in such a way that your tools will be perfectly arranged. This way, you will not need to worry about the loss or theft of your tools. You will enjoy the peace of mind that comes with getting things properly organized.

If you are bothered about how to organize wrenches in the toolbox, the information in this piece is very helpful. By properly following the advice given above, you will be saving a lot of space which will make your drawer to be effectively utilized. In addition, you will have the opportunity of saving time which would have been used in searching for tools if they are not properly arranged.

We will be happy to hear your thoughts

      Leave a reply

      BestNetReview
      Logo